Amy’s Simple Hanging Tea Towel Tutorial

In the early weeks after our shop opened, Amy from Amy’s Crafty Shenanigans gave me a tea towel to cuten-up (not a word?) our bathroom. I’ve been pestering her to do a tutorial ever since, and now she’s finally done one! I love this. It’s a great way to add some charm and a personal touch to a simple store bought tea towel and makes a really great gift. Take it away, Amy






Amy's tea towel

  • 8″ x 8.5″ piece of linen fabric (or any fabric really – just be aware of pattern direction during assembly)
  • 8″ x 8.5″ piece of iron-on interfacing
  • One 2″piece of sew-in Velcro
  • 1 waffle weave (or linen or thin cotton) tea towel
  • One AWESOME button (I used a ceramic button purchased at a craft fair many years ago and used embroidery floss to attach it)


1.  Iron the interfacing onto the wrong side of your fabric.

2.  Crease fabric down the middle along the long side.

3.  Lay fabric flat and good side facing up.  Use a ruler and Hera marker (or chalk or some sort of marking device that can be removed), draw your 1/4″ seam allowance along the long sides.  These will be used to help place the Velcro in the correct place.  See picture in Step 4 to see the scored lines.

4.  Now place your button on the right hand side 1.25″ from the bottom and centred between the 1/4″ line and the creased centre line.

Amy's tea towel

5.  Place one part of the Velcro one inch from the top on the left side, centred between the 1/4″ line and the crease in the middle.  Pin in place.

6.  Place the other Velcro part 1.25″ from the bottom on the left side and centred between the 1/4″ line and the crease in the middle.  Pin in place.  Refer to the picture in Step 4.

7.  Sew both of your Velcro pieces on.

Amy's tea towel

8.  Sew your button on.  I hand sewed mine on using embroidery floss because the button was ceramic.  Feel free to attach your button using your sewing machine.

Tea towel tutorial (A8)

Arrows show where I attached the two Velcro pieces and the button.


9.  Fold fabric in half along the crease in the middle so that the right sides are together.

10.  You will now sew two of the three open sides.  Please sew the long side and the short end where your button is.  Press.  Trim corners.

11.  Turn right side out and push the corners out and press again so this rectangle is flat, taking care to avoid the Velcro (it will melt!).

Tea towel tutorial (A11)

12.  Take your tea towel and cut it down to 15″ tall (or shorter if you prefer) so that three sides still have the original hem of the store-bought tea towel.

Amy's tea towel

13.  Now we need to fold and manipulate the raw edge of the tea towel so it will insert into the fabric rectangle opening.  Here is a picture how I folded and creased mine but it all depends on the thickness of the towel and if you like uniform or irregular pleats or folds.


14.  Take the fabric rectangle and turn the raw edge inside about 1/4″ to 1/2″ and press.  Avoid the Velcro!

Amy's tea towel

Amy's tea towel

15.  Insert the folded towel top into the opening of the rectangle and pin in place.  Check the front and back to see that you are happy with the placement of the folds or pleats and how the towel hangs.  Adjust if necessary.

Amy's tea towel

Tea towel tutorial (A3)

Amy's tea towel

Amy's tea towel

16.  Top stitch approximately 1/8″ around the entire rectangle, locking the tea towel in place and giving a nice finish.  I did a double row of stitches where the tea towel is inserted into the fabric rectangle.

Tea towel tutorial (1)

17.  Press and hang on the oven door or cupboard handle.  Step back and admire your work!

Amy's tea towel

Tag me on IG if you make one: @amyscraftyshenanigans

Previous article Introducing Click & Collect!

Leave a comment

Comments must be approved before appearing

* Required fields