Tutorial: Patchwork Rainbow Cloud wall hanging
Earlier this week we posted the images of our Great British Summer Outing shop display and as promised, here is the tutorial for how to make the patchwork cloud that features in it.
I have to admit, when I was making this I was just kind of making it up as I went along! As this is a project you can make in any size I have not given and exact measurements.
What you will need:
A plain grey fabric for the background and the backing. (I used Manchester Yarn Dyes – Steel)
Long strips of fabric in rainbow colours (skinny quarters of Kona Cotton Solids work great for this)
Wadding or Toy Filling (whichever you prefer)
General sewing supplies
1. Draw your shape out on a piece of paper making sure it is about half an inch larger than you want the finished cloud to be to allow for seam allowances.
2. Cut out your shape. This is now your template.
3. Draw 8 evenly spaced lines out to mark out where your rainbow stripes will go.
4. Cut out long strips of the coloured fabrics twice as wide as the rainbow stripes, plus 1 inch. Don’t worry too much about the length, just make sure they are a bit longer than the lines you have drawn on your template. Then iron these strips in half longways. This automatically finished one of their edges.
5. Find matching threads for each of your colours. (It is up to you how fussy you want to be about how well they match).
6. One at a time, layer your stripes by overlapping them in ‘rainbow order’. You are aiming for the visible parts of the stripes to be the same width as the lines you drew on the template.
7. Top stitch them together 1/4inch from the fold of the top piece. I used the 1/4inch seam foot on my machine to help with this.
8. You should end up with a block of coloured stripes with a neat fold at one side and raw edges at the other.
9. Cut half of your main cloud front fabric in half diagonally so you have a piece for either side of the cloud. (Make sure you leave enough for the backing). Overlap the bottom side of the rainbow over the corresponding diagonal main cloud front piece.
10. Top stitch 1/4inch from the fold to join them.
11. Place the raw edge of the rainbow right sides together with the other corresponding diagonal side of the main cloud fabric. Stitch with a 1/2inch seam and press the seam towards the cloud.
12. Your should now have something that looks something like this…
13. Place your paper cloud template on top and pin it down.
14. Cut around your template to get your final shape.
15. Cut out a second cloud shape from your cloud backing fabric. Place your cloud backing and cloud front right sides together and pin. Sew all the way around with a 1/2inch seam allowance leaving a gap for turning and stuffing. You will need to pivot at the corners.
16. Clip the curves and snip into the troughs and turn right sides out. Press.
17. Fill with toy stuffing or wadding and sew up the gap. You can also top stitch around the whole shape if you like or even quilt it.
18.You can then hang up your cloud with invisible thread if you wish or use it as something else… a cushion perhaps?
The sun and the raindrops are made simply by cutting out two of each shape, placing them right sides together, sewing around them leaving a gap and then turning to the right side and finishing. Easy!
We would love to see your versions of our rainbow cloud. Share your makes with #thevillagehaberdashery.